Lead Halide Perovskite Quantum Dots Research Articles

CsPbBr3 perovskite quantum dots-based Janus membrane with multifunction of luminescence, magnetism and aeolotropic electroconductivity

Lead halide perovskite quantum dots (QDs) are promising semiconductors for next-generation photoelectric devices. However, the development of perovskite QDs-based multifunctional materials still needs to be addressed in order to further advance the application of perovskite QDs. Herein, a successful synthesis of Janus microfibers array Janus membrane (JMAJM) with up-down structure and multifunction of luminescence, magnetism and electroconductivity is firstly achieved based on CsPbBr3 QDs through a parallel electrospinning. JMAJM comprises up-down two layers tightly bonded together. The up-layer of JMAJM is luminescence/magnetism Janus microfibers array (L/M-JMAJM) constructed by [CsPbBr3/polymethyl methacrylate (PMMA)]//[CoFe2O4/PMMA] Janus microfibers as building elements. The down-layer of JMAJM is luminescence/electroconductivity Janus microfibers array (L/E-JMAJM) fabricated by [CsPbBr3/PMMA]//[polyaniline (PANI)/PMMA] Janus microfibers as building elements. Two independent microcosmic regions are designed and realized in a Janus microfiber, confining luminescence with magnetic or conductive substances into their respective regions, thus minimizing adverse effects of other dark-colored functional substances on the fluorescence of CsPbBr3 QDs. This peculiar Janus microfiber enables the effective separation and high integration of CsPbBr3 QDs with other functional substances. The up-down structure of JMAJM ensures a high integration of luminescence, magnetism and conductivity. Meanwhile, JMAJM addresses the environmental instability of CsPbBr3 QDs while simultaneously endows perovskite QDs-based materials with additional functions to realize multifunction. Under ultraviolet excitation, fluorescence characteristics of the CsPbBr3 QDs in JMAJM are maintained, exhibiting a vibrant green emission at 517 nm. Meanwhile, JMAJM achieves a maximum saturation magnetization of 20.32 emu·g−1, high conductance of 10-2 S and aeolotropic electroconductivity degree of 107. The combination of micro-partition with macro-partition in JMAJM receives superior concurrent luminescence-magnetic-conductive multifunction. This work provides a novel idea and strategy for advancing perovskite QDs-based multifunctional materials.

ZnS-coated Yb3+-doped perovskite quantum dots: A stable and efficient quantum cutting photon energy converter for silicon-based electronics

Yb3+ doped lead halide perovskite quantum dots (PeQDs) with efficient quantum cutting emission are thought to be the most promising photon energy converter for improving the performance of silicon-based electronics. Nevertheless, the low external quantum efficiency (EQE) and instability make it unfeasible for industrial use. Here, we present a unique PeQDs@ ZnS core–shell device that achieves outstanding stability and up to 39 % EQE by effectively controlling energy transfer from the PeQDs to the Yb3+ through ZnS coating. These advances are attributed to the large UV absorption and the strong localized effect of the ZnS shells on the conduction band electrons of the PeQDs. Density functional theory (DFT) first-principles simulations indicate that ZnS coating can facilitate the energy transfer of PeQDs to Yb3+. Power conversion efficiency (PCE) of silicon solar cells was significantly enhanced by ZnS-coated Yb3+ doped PeQDs, yielding a noteworthy 13.5 % relative PCE improvement over 30 measurement sets. Significantly, the stability of SSCs with ZnS-coated PeQDs films is considerably improved, resulting in a capped device T80 lifespan of up to 11,224 h. Moreover, ZnS-coated PeQDs films can significantly boost the EQE of silicon photodiodes (Si-PDs) and extend their response to deep ultraviolet light. This paper presents an efficient and consistently stable photon energy converter with great commercialization potential.

Highly Luminescent and Stable Perovskite Quantum Dots Films for Light‐Emitting Devices and Information Encryption

AbstractThe inherent flexibility and excellent mechanical strength of lead halide perovskite quantum dots (LHP‐QDs) films have attracted much attention in the fields of flexible lighting, displays, non‐planar x‐ray imaging, and wearable optoelectronics. Unfortunately, the complicated synthesis process and poor stability limit its practical applications, hence there is an urgent need to develop a feasible fabrication process for films to attain high device performance. Herein, a molecular level hybridization of bridged polysilsesquioxane (BPSQ) is designed as matrix to harvest both flexibility of organics and stability of inorganics, resulting in improved interfacial compatibility between the CsPbBr3 QDs and the matrix through chemical bond anchoring. The CsPbBr3@3‐aminopropyl‐triethoxysilane (APTES)@BPSQ films showcase bright narrow‐band photoluminescence, with a photoluminescence quantum yield of 61% and a half‐peak full width at half maximum of <17 nm. Notably, these films demonstrate excellent environmental stability, UV resistance, water stability (experiencing only an 18% decrease in luminescence intensity after 168 h of water immersion), and high‐temperature stability (withstanding temperatures up to 500 K). Furthermore, white light‐emitting diodes (WLEDs) and anti‐counterfeiting patterns have been fabricated using CsPbBr3@APTES@BPSQ, highlighting their wide application potential in flexible light‐emitting devices and information encryption.

The future of quantum technologies: superfluorescence from solution-processed, tunable materials

Abstract One of the most significant and surprising recent developments in nanocrystal studies was the observation of superfluorescence from a system of self-assembled, colloidal perovskite nanocrystals [G. Rainò, M. A. Becker, M. I. Bodnarchuk, R. F. Mahrt, M. V. Kovalenko, and T. Stöferle, “Superfluorescence from lead halide perovskite quantum dot superlattices,” Nature, vol. 563, no. 7733, pp. 671–675, 2018]. Superfluorescence is a quantum-light property in which many dipoles spontaneously synchronize in phase to create a collective, synergistic photon emission with a much faster lifetime. Thus, it is surprising to observe this in more inhomogenous systems as solution-processed and colloidal structures typically suffer from high optical decoherence and non-homogeneous size distributions. Here we outline recent developments in the demonstration of superfluorescence in colloidal and solution-processed systems and explore the chemical and materials science opportunities allowed by such systems. The ability to create bright and tunable superfluorescent sources could enable transformative developments in quantum information applications and advance our understanding of quantum phenomena.

A smartphone-assisted fluorescent sensing platform for ochratoxin A using Mn-doped CsPbBr3 perovskite quantum dots embedded in the mesoporous silica as a ratiometric probe

Food sources are susceptible to contamination with ochratoxin A (OTA), which is a serious threat to human health. Thus, the construction of novel, simple sensing platforms for OTA monitoring is of utmost need. Manganese-doped lead halide perovskite quantum dots encapsulated with mesoporous SiO2 (Mn-CsPbBr3 QDs@SiO2) were prepared here and used as a ratiometric fluorescent probe for OTA. Mn-CsPbBr3 QDs, synthesized at room temperature, exhibit dual emission with maximum wavelengths of 440 and 570 nm and, when embedded in the SiO2 layer, produce a stable and robust photoluminescence signal. By adding OTA to the probe, emission at 440 nm increases while emission at 570 nm decreases, so a ratiometric response is obtained. Experimental variables affecting the probe signal were studied and optimized and the mechanism of sensing was discussed. This ratiometric sensor demonstrated excellent selectivity and low detection limit (4.1 ng/ml) as well as a wide linear range from 5.0 to 250 ng/ml for OTA. A simple portable smartphone-based device was also constructed and applied for the fluorescence assay. With different OTA concentrations, the multicolor transition from pink to blue under a UV lamp led to simple visual and smartphone-assisted sensing of OTA by using a color analyzing application. Satisfactory recoveries in black tea, coffee, moldy fig and flour samples confirmed the reliability of the assay. The accuracy of the probe was proved by comparison of the results with high-performance liquid chromatography (HPLC).

Strong Light-Matter Coupling in Lead Halide Perovskite Quantum Dot Solids.

Strong coupling between lead halide perovskite materials and optical resonators enables both polaritonic control of the photophysical properties of these emerging semiconductors and the observation of fundamental physical phenomena. However, the difficulty in achieving optical-quality perovskite quantum dot (PQD) films showing well-defined excitonic transitions has prevented the study of strong light-matter coupling in these materials, central to the field of optoelectronics. Herein we demonstrate the formation at room temperature of multiple cavity exciton-polaritons in metallic resonators embedding highly transparent Cesium Lead Bromide quantum dot (CsPbBr3-QD) solids, revealed by a significant reconfiguration of the absorption and emission properties of the system. Our results indicate that the effects of biexciton interaction or large polaron formation, frequently invoked to explain the properties of PQDs, are seemingly absent or compensated by other more conspicuous effects in the CsPbBr3-QD optical cavity. We observe that strong coupling enables a significant reduction of the photoemission line width, as well as the ultrafast modulation of the optical absorption, controllable by means of the excitation fluence. We find that the interplay of the polariton states with the large dark state reservoir plays a decisive role in determining the dynamics of the emission and transient absorption properties of the hybridized light-quantum dot solid system. Our results should serve as the basis for future investigations of PQD solids as polaritonic materials.

Crystallization engineering in PVDF enables ultrastable and highly efficient CsPbBr3 quantum dots film for wide color gamut Mini-LED backlight

The polymeric composite films incorporating inorganic lead halide perovskite quantum dots (CsPbX3 QDs, X = Cl, Br or I) are promising color conversion layers for wide gamut display devices such as Mini-LED backlight-based televisions. However, the relatively low emission efficiency and poor stability of these composite films present significant challenges for practical applications. In this study, we present a novel low-temperature in-situ crystallization strategy to prepare CsPbBr3/PVDF composite film through a rational designed of precursor, solvent and polymer structure. The strong interaction between PVDF and perovskite QDs via Lewis acid-base interaction allows for precise control over the crystallization and passivation of perovskite QDs. The optimized CsPbBr3/PVDF film exhibits bright emission with a photoluminescence quantum yield (PLQY) of up to 70 %, surpassing those of other CsPbBr3/polymers counterparts. Furthermore, the films demonstrate remarkable stability, retaining over 90 % of their original PLQY even after 50 days of aging under various environmental conditions such as exposure to air, immersion in water and blue light irradiation. By integrating the green and red emissive CsPbX3/PVDF films with blue Mini-LEDs, we successfully fabricate a prototype liquid crystal display (LCD) with an outstanding wide color gamut (128 % of NTSC 1931). These performances outperform that of commercial white-LED-based LCDs, highlighting the immense potential of CsPbX3/PVDF for high-definition display applications in the future.

Manipulating Coherent Exciton Dynamics in CsPbI3 Perovskite Quantum Dots Using Magnetic Field.

Lead halide perovskite quantum dots (QDs) have recently emerged as a promising material platform for quantum information processing owing to their strong light-matter interaction and relatively long-lived optical and spin coherences. In particular, the coherence of the fine-structure bright excitons is sustainable up to room temperature and can be observed even at an ensemble level. Here modulation of the polarization of these excitons in CsPbI3 QDs and manipulation of their time-domain coherent dynamics using a longitudinal magnetic field are demonstrated. The manipulation is realized using femtosecond quantum beat spectroscopy performed with both circularly- and linearly-polarized pulses. The results are well captured by the density of matrix simulation and are picturized using a Bloch sphere. This study forms the basis for preparing arbitrary coherent superpositions of excitons in perovskite QDs for an array of quantum technologies under near-ambient conditions.

Manipulation of hot-carrier cooling dynamics in CsPbBr3 quantum dots via site-selective ligand engineering.

Prolonging the lifetime of photoinduced hot carriers in lead-halide perovskite quantum dots (QDs) is highly desirable because it can help improve the photovoltaic conversion efficiency. Ligand engineering has recently become a promising strategy to achieve this; nevertheless, mechanistic studies in this field remain limited. Herein, we propose a new scenario of ligand engineering featuring Pb2+/Br- site-selective capping on the surface of CsPbBr3 QDs. Through joint observations of temperature-dependent photoluminescence, ultrafast transient absorption, and Raman spectroscopy of the two contrasting model systems of CsPbBr3 QDs (i.e., capping with organic ligand only vs hybrid organic/inorganic ligands), we reveal that the phononic regulation of Pb-Br stretching at the Br-site (relative to Pb-site) leads to a larger suppression of charge-phonon coupling due to a stronger polaronic screening effect, thereby more effectively retarding the hot-carrier cooling process. This work opens a new route for the manipulation of hot-carrier cooling dynamics in perovskite systems via site-selective ligand engineering.

Cation Exchange in Lead Halide Perovskite Quantum Dots toward Functional Optoelectronic Applications

Lead halide perovskite quantum dots (PQDs) exhibit properties tunability and solution processability, rending them highly promising for optoelectronic applications. To overcome the compositional limits of thin‐film perovskite and achieve mixed A‐site PQDs, a post‐synthetic cation‐exchange process, driven by the intrinsic ionic character as well as the dynamic surface structure within the PQDs, emerges as a highly efficient approach. The cation‐exchange process can be precisely regulated by manipulating PQD‐situated environment, such as the cation species, stoichiometric ratios, and surface ligand conditions, leading to tunable optical bandgap, improved stability, and enhanced carrier lifetime over the single A‐site PQDs. These advancements hold immense potential for elevating the performance of PQD‐based optoelectronic devices. In this perspective, a timely summary and outlook on the emergence and developments of cation exchange in functional PQDs is presented, as well as the intrinsic cation‐exchange mechanism and properties of these resultant‐mixed‐cation PQDs. It is believed that these detailed discussions are beneficial for advancing further development of cation exchange and utilization of mixed‐cation PQDs toward functional optoelectronic applications.

Sub-Single-Exciton Optical Gain in Lead Halide Perovskite Quantum Dots Revealed by Exciton Polarization Spectroscopy.

Optical gain of colloidal quantum dots (QDs) is often attained in the multiexciton regime, which strongly complicates their lasing applications as the gain lifetime is limited by nonradiative Auger recombination occurring typically on the picosecond time scale. In principle, low-threshold gain can be achieved if the gain-active emission has a sizable red shift compared to the absorption. But, this mechanism has been rarely observed in typical QDs featuring small Stokes shift due to their weak electron-phonon coupling. Here, we report the observation of sub-single-exciton gain in CsPbI3 and CsPbBr3 perovskite QDs, which is unequivocally established through pinpointing the stimulated emission and biexciton absorption signatures using polarization-controlled femtosecond transient absorption spectroscopy. The soft lattice of perovskite QDs and hence strong electron-phonon coupling lead to two stimulated emission features from free and self-trapped excitons, respectively. In monodisperse QDs of varying sizes, the Stokes shift of the self-trapped exciton emission is sufficiently large to overcome the biexciton absorption loss and the inhomogeneous line width, enabling optical gain with average exciton occupancy down to <10%.

Smart Dope: A Self‐Driving Fluidic Lab for Accelerated Development of Doped Perovskite Quantum Dots

AbstractMetal cation‐doped lead halide perovskite (LHP) quantum dots (QDs) with photoluminescence quantum yields (PLQYs) higher than unity, due to quantum cutting phenomena, are an important building block of the next‐generation renewable energy technologies. However, synthetic route exploration and development of the highest‐performing QDs for device applications remain challenging. In this work, Smart Dope is presented, which is a self‐driving fluidic lab (SDFL), for the accelerated synthesis space exploration and autonomous optimization of LHP QDs. Specifically, the multi‐cation doping of CsPbCl3 QDs using a one‐pot high‐temperature synthesis chemistry is reported. Smart Dope continuously synthesizes multi‐cation‐doped CsPbCl3 QDs using a high‐pressure gas‐liquid segmented flow format to enable continuous experimentation with minimal experimental noise at reaction temperatures up to 255°C. Smart Dope offers multiple functionalities, including accelerated mechanistic studies through digital twin QD synthesis modeling, closed‐loop autonomous optimization for accelerated QD synthetic route discovery, and on‐demand continuous manufacturing of high‐performing QDs. Through these developments, Smart Dope autonomously identifies the optimal synthetic route of Mn‐Yb co‐doped CsPbCl3 QDs with a PLQY of 158%, which is the highest reported value for this class of QDs to date. Smart Dope illustrates the power of SDFLs in accelerating the discovery and development of emerging advanced energy materials.

Electric-Field Fluctuations as the Cause of Spectral Instabilities in Colloidal Quantum Dots.

Spectral diffusion (SD) represents a substantial obstacle toward implementation of solid-state quantum emitters as a source of indistinguishable photons. By performing high-resolution emission spectroscopy for individual colloidal quantum dots at cryogenic temperatures, we prove the causal link between the quantum-confined Stark effect and SD. Statistically analyzing the wavelength of emitted photons, we show that increasing the sensitivity of the transition energy to an applied electric field results in amplified spectral fluctuations. This relation is quantitatively fit to a straightforward model, indicating the presence of a stochastic electric field on a microscopic scale, whose standard deviation is 9 kV/cm, on average. The current method will enable the study of SD in multiple types of quantum emitters such as solid-state defects or organic lead halide perovskite quantum dots, for which spectral instability is a critical barrier for applications in quantum sensing.

Multi-Functional Ethylene-vinyl Acetate Copolymer Flexible Composite Film Embedded with Indium Acetate-Passivated Perovskite Quantum Dots.

In recent years, all-inorganic cesium lead halide perovskite quantum dots have emerged as promising candidates for various optoelectronic applications, including sensors, light-emitting diodes, and solar cells, owing to their exceptional photoelectric properties. However, their commercial utilization has been limited by stability issues. In this study, we addressed this challenge by passivating the surface defects of CsPbBr3 quantum dots using indium acetate, a metal-organic compound. The resulting CsPbBr3 quantum dots exhibited not only high photoluminescence intensity, but also a remarkably narrow half-peak width of 19 nm. Furthermore, by embedding the CsPbBr3 quantum dots in ethylene-vinyl acetate, we achieved stretchability and significantly enhanced stability while preserving the original luminous intensity. The resulting composite film demonstrated the potential to improve the power conversion efficiency of crystalline silicon solar cells and enabled the creation of excellent white light-emitting diodes with coordinates of (0.33, 0.31). This co-passivation strategy, involving surface passivation and polymer packaging, provides a new idea for the practical application of CsPbBr3 quantum dots.

Molecularly imprinted fluorescence assay based on lead halide perovskite quantum dots for determination of benzo(a)pyrene.

Molecularly imprinted polymers with methylammonium lead halide perovskite quantum dots (MIP@MAPbBr3 PQDs) have been prepared and applied tothe determination of benzo(a)pyrene (BaP) for the first time. The photoluminescence (PL) of MIP@MAPbBr3 PQDs was enhanced due to the surface passivation of defects by BaP. PL excitation and emission spectra, X-ray diffraction, Fourier transform infrared, and time-resolved PL studies suggest that the interaction between MIP@MAPbBr3 PQDs and BaP is a dynamic process. After MIP@MAPbBr3 PQDs were incubated with BaP, the benzene ring in the molecular structure of BaP can interact with MIP@MAPbBr3 PQDs through π electrons, which reduces non-radiative recombination of MIP@MAPbBr3 PQDs and lengthens excited state lifetime. The PL intensity of the MIP@MAPbBr3 PQDs-BaP system was monitored at 520 nm with 375 nm excitation. Under optimized conditions, the PL intensity of MIP@MAPbBr3 PQDs is linear with the concentration of BaP in the 10 to 100 ng·mL-1 range, with a detection limit of 1.6 ng·mL-1. The imprinting factor was 3.9, indicating excellent specificity of MIP@MAPbBr3 PQDs for BaP. The MIP@MAPbBr3 PQDs were subsequently applied to the PL analysis of BaP in sunflower seed oil, cured meat, and grilled fish samples, achieving recoveries from 79.3 to 107%, and relative standard deviations below 10%. This molecularly imprinted fluorescence assay improves the selectivity of BaP in complex mixtures and could be extended to other analytes.

Comprehensive Neurotoxicity of Lead Halide Perovskite Nanocrystals in Nematode Caenorhabditis elegans.

To date, all-inorganic lead halide perovskite quantum dots have emerged as promising materials for photonic, optoelectronic devices, and biological applications, especially in solar cells, raising numerous concerns about their biosafety. Most of the studies related to the toxicity of perovskite quantum dots (PeQDs) have focused on the potential risks of hybrid perovskites by using zebrafish or human cells. So far, the neurotoxic effects and fundamental mechanisms of PeQDs remain unknown. Herein, a comprehensive methodology is designed to investigate the neurotoxicity of PeQDs by using Caenorhabditis elegans as a model organism. The results show that the accumulation of PeQDs mainly focuses on the alimentary system and head region. Acute exposure to PeQDs results in a decrease in locomotor behaviors and pharyngeal pumping, whereas chronic exposure to PeQDs causes brood decline and shortens lifespan. In addition, some abnormal issues occur in the uterus during reproduction assays, such as vulva protrusion, impaired eggs left in the vulva, and egg hatching inside the mother. Excessive reactive oxygen species formation is also observed. The neurotoxicity of PeQDs is explained by gene expression. This study provides a complete insight into the neurotoxicity of PeQD and encourages the development of novel nontoxic PeQDs.

Multifunctional Short-Chain 2-Thiophenealkylammonium Bromide Ligand-Assisted Perovskite Quantum Dots for Efficient Light-Emitting Diodes.

Lead halide perovskite quantum dots (QDs) have attracted great interest for application in light-emitting diodes (LEDs) due to their high photoluminescence quantum yield (PLQY), solution processability, and high color purity, showing great potential for next-generation full-color display and lighting technologies. Conventional long-chain insulating oleic acid (OA)/oleamine (OAm) ligands exhibit dynamic binding to the surface of QDs, resulting in a plethora of extra surface defects and inferior optoelectronic properties. Herein, a sole multifunctional ligand with optimized carbon chain length, that is, 2-thiophenepropylamine bromide (ThPABr), was creatively designed and introduced into CsPbBr3 QDs, which not only replaces OAm and provides a bromine source but also coordinates with the uncoordinated surface Pb2+ of QDs through the thiophene, passivating surface defects and increasing the PLQY of the film to 83%. More importantly, the interaction between the electron donor-thiophene ring and QDs can enhance electron injection and improve carrier balance. The resulting green LED exhibited significant performance improvement, showing ultrahigh spectral stability under high operating voltage, achieving a maximum external quantum efficiency of 10.5%, and extending the operating lifetime to 5-fold that of the reference. Designing a single multifunctional ligand presents a promising and convenient strategy for selecting surface ligands that can enhance the performance of LEDs or other optoelectronic devices.

Guanidium iodide treatment of size-controlled CsPbI3 quantum dots for stable crystal phase and highly efficient red LEDs

The optoelectronic properties of lead-halide perovskite quantum dots (QDs) can be tuned according to their halogen composition ratio and quantum size effect. However, the pure red emission of CsPbI3 QDs exhibits poor phase stability, thereby resulting in a phase transition to a nonphotoactive yellow phase at room temperature. These phase instabilities are accompanied by crystal strain and instability of the QD surface, which induce ion diffusion and desorption. Herein, we demonstrate the precise size control and postsynthetic guanidinium iodide (GAI) treatment to stabilize the crystal phase of CsPbI3 QDs. These synergistic effect results in higher ambient photoluminescence stability and photostability than those of pristine QDs. More importantly, the CsPbI3 QD light-emitting diodes achieve excellent external quantum efficiency of 22.5% and longer operational stability of over 10 h by the synergy effect of QD size control and GAI treatment.

Synthesis of bright blue fluorescence and water-dispersible cesium lead halide perovskite quantum dots for the selective detection of pendimethalin pesticide

Perovskite quantum dots (PQDs) have garnered a lot of interest because of their exceptional optoelectronic qualities. Halide perovskites are very water-sensitive due to their ionic composition. It has been observed that encapsulating perovskite QDs with organic or inorganic materials improve their stability; nonetheless, they frequently suffer from large aggregation size, limited water solubility, and difficulty in subsequent surface functionalization. Herein, we have reported polystyrene and cetyltrimethylammonium bromide (CTAB) as a novel ligands for the surface modification of CsPbBr3 PQDs for the rapid fluorescence detection of pendimethalin pesticide in aqueous media. The as-fabricated PS-CsPbBr3@CTAB PQDs give blue fluorescence under UV light at 365 nm and exhibit good stability. When excited at 370 nm, fluorescent PS-CsPbBr3@CTAB PQDs display emission intensity at 436 nm. Upon addition of pendimethalin pesticide, the fluorescence of PS-CsPbBr3@CTAB PQDs was dramatically quenched, which yields to fluorescence turn-off. Noticeably, a linear quenching was achieved with increasing concentration of pendimethalin pesticide (5.0–100 μM) with the detection limit of 30.34 nM. Moreover, the as-synthesized PS-CsPbBr3@CTAB PQDs acted as a sensor for accurate assay of pendimethalin in potato and apple with low relative standard deviation values.

Layered B2O3/CsPbBr3 perovskite composite embedded using glass as microreactor with enhanced stability and high-efficiency light extraction

Lead halide perovskite quantum dots are considered to be one of the best candidates for the next generation of light conversion materials. However, their practical application is greatly hindered by its intrinsic poor stability and once exposed to air, heat moisture and illumination. Here, we report a novel reaction scheme that allows the simultaneous production of high-quality CsPbBr3 nanocrystals (NCs), self-healing process that optimized the crystallinity of CsPbBr3 NCs, and the formation of a protective coating layered structure of a densely packed two-dimensional B2O3 crystals with the assistance of water. Due to the inherent refractive index mismatch in the B2O3-CsPbBr3-B2O3 (B-C-B) laminated structure, excellent light extraction efficiency was achieved. The resulted layered B2O3/CsPbBr3 perovskite composite showed exceptionally high photoluminescence quantum yield (PLQY ∼90%) and excellent stability over 2 years under normal storage condition. A high-performance backlight liquid crystal display (LCD) was designed as B2O3/CsPbBr3 @ K2SiF6: Mn4+ (KSF: Mn4+) @ polydimethylsiloxanes (PDMS) monolithic film, which featured an optimal white emission (with correlated color temperature of 5327 K), that covered 130% of NTSC standard color gamut area of CIE1931, thereby demonstrating a great application potential in the optoelectronics industry.